Incoterms explained: all you need to know

Incoterms explained: all you need to know

What each Incoterms 2020 rule means, where risk passes from seller to buyer, what changed from 2010, and the most common mistakes in contracts.

by Tonnis de Boer

March 7, 2018

Containers and transport illustrating international trade terms

Incoterms are part of the everyday language of international trade. They are written into sales contracts worldwide and guide importers, exporters, lawyers, transporters, insurers and students.

The rules are published by the International Chamber of Commerce (ICC). They describe three things:

  • Obligations: who arranges carriage, insurance, shipping documents and licences.
  • Risk: where and when the risk passes from seller to buyer.
  • Costs: who pays for what.

Each rule is set out in ten articles. The A articles describe the seller's obligations, the B articles those of the buyer. This article follows Incoterms 2020, which took effect in January 2020.

Two groups of rules

Incoterms 2020 has eleven rules, split into two groups:

  • Rules for any mode of transport: EXW, FCA, CPT, CIP, DAP, DPU and DDP.
  • Rules for sea transport: FAS, FOB, CFR and CIF. Use these only for bulk and non-containerised cargo that is loaded directly onto a vessel.

Rules for any mode of transport

EXW (Ex Works)

The seller delivers when the goods are placed at the buyer's disposal at the seller's premises or another named place. The goods are not cleared for export and not loaded onto a collecting vehicle. The seller has no obligation to load.

FCA (Free Carrier)

The seller delivers the goods, cleared for export, to the carrier nominated by the buyer at the named place. The place of delivery determines who loads and unloads. If delivery takes place at the seller's premises, the seller loads the goods. At any other place, the seller is not responsible for unloading.

CPT (Carriage Paid To)

The seller delivers the goods to a carrier it has nominated and pays the cost of carriage to the named destination.

CIP (Carriage and Insurance Paid To)

As with CPT, the seller delivers the goods to its nominated carrier and pays carriage to the named destination. The seller also pays for insurance against loss or damage during transport. Under Incoterms 2020, the default cover for CIP is the broad Clause A cover (see below).

DAP (Delivered At Place)

The seller has delivered once the goods are on the arriving means of transport, ready for unloading, at the named place of destination. The seller arranges the contract of carriage. The parties should specify the exact point within the destination as clearly as possible, because the seller bears the risk up to that point.

DPU (Delivered at Place Unloaded)

DPU replaced DAT (Delivered At Terminal). The seller has delivered once the goods are unloaded from the arriving means of transport and placed at the buyer's disposal at the named place. That place can be a terminal, such as a quay, warehouse, container yard or road, rail or air cargo terminal, but it can also be any other location. The seller bears all costs and risks of bringing the goods to that place and unloading them. The seller handles export clearance where applicable, but has no obligation to clear the goods for import, pay import duty or carry out import formalities.

DDP (Delivered Duty Paid)

The seller delivers the goods, cleared for import and ready for unloading, at the named place of destination. This rule puts the maximum obligation on the seller and the minimum on the buyer. The buyer's only responsibility is to unload the goods at the place of delivery. Import VAT and other taxes are for the seller's account, unless the sales contract says otherwise. If the seller cannot obtain import clearance, directly or indirectly, DAP is the better choice.

Rules for sea transport

FAS (Free Alongside Ship)

The seller has delivered once the goods are placed alongside the vessel at the named port of shipment. From that moment the buyer bears all costs and risks. The buyer should give the seller the loading point, the name of the vessel and the delivery time within the agreed period. If the buyer gives no details, the seller may choose a point alongside the ship. If the buyer changes the loading point after the first instruction, the seller does not have to pay the extra transfer costs, as long as it followed the first instruction.

FOB (Free On Board)

The seller has delivered once the goods are on board the vessel at the named port of shipment, and bears the costs and risks until then. Containerised goods are usually handed over at a container yard or warehouse, not on board a ship. For containers, FCA, CPT or CIP are therefore a better fit than FOB, CFR or CIF.

CFR (Cost and Freight)

The seller has delivered once the goods are on board the vessel at the port of shipment. The seller pays the freight to the named port of destination. Insurance is not covered, so the buyer is expected to arrange its own.

CIF (Cost, Insurance and Freight)

The seller has delivered once the goods are on board the vessel at the port of shipment. The seller pays both freight and insurance, which relieves the buyer of arranging insurance. The drawback: the seller only has to buy minimum cover (Clause C), and the policy conditions can make claims difficult.

Where does the risk transfer?

IncotermRisk passes to the buyer when the goods are
EXWAt the buyer's disposal
FCADelivered to the carrier at the named place
FASAlongside the ship
FOBOn board the vessel at the port of origin
CFROn board the vessel at the port of origin
CIFOn board the vessel at the port of origin
CPTDelivered to the main carrier at origin
CIPDelivered to the main carrier at origin
DAPOn the arriving transport, ready for unloading at the named destination
DPUUnloaded from the arriving transport and at the buyer's disposal at the named destination
DDPCleared for import, ready for unloading at the named destination

Incoterms and the transfer of risk

With every transaction, both parties have to decide whether to keep a risk or transfer it. Insurance turns an uncertain exposure into a known premium that you can budget for. That premium covers the insurer's overheads, its profit and a contribution to catastrophe losses. Every company faces many risks, and sooner or later a loss will occur. The Incoterm you choose should help you limit that exposure in a cost-effective way.

Incoterms 2020: what changed and why it matters

Why it is better to avoid EXW and DDP

EXW and DDP sit at opposite ends of the scale. EXW favours the seller, DDP favours the buyer, and each can leave the other party with problems it did not foresee.

Under EXW, the seller makes the goods available at its premises, but in practice often loads them and handles transport and export formalities on the buyer's behalf. If something goes wrong, the seller is not liable and the buyer absorbs the consequences. FCA is often a better choice, even when delivery still takes place at the seller's dock.

Under DDP, the seller handles the import formalities and often becomes the importer of record. That makes the seller liable for product issues in the destination country. In that case, DAP or DPU is usually the safer option.

EXW and DDP are still useful for calculating a factory-gate price or a landed cost, and for domestic trade or trade within a customs union, where customs obligations are minimal.

From DAT to DPU

In Incoterms 2010, the only difference between DAP and DAT was whether the goods were delivered loaded (DAP) or unloaded (DAT). Incoterms 2020 changed two things. DAP now comes before DAT in the list, and DAT was renamed DPU, because the place of delivery can be any location, not only a terminal.

Under DPU the seller handles export formalities but not import formalities, including transit through third countries after delivery. If the buyer fails to clear the goods for import, the buyer bears the risk, the costs and any holding charges at the point of entry. If that is a real concern, DDP may be worth considering. The difference between loaded and unloaded delivery matters most when unloading carries significant risk or needs special equipment.

Using your own means of transport

Incoterms 2010 assumed that a third-party carrier would move the goods and only spoke of contracting carriage. That did not cover a buyer or seller using its own vehicles. Incoterms 2020 corrects this for FCA, DAP, DPU and DDP: the party responsible must contract or arrange carriage, at its own cost, to the named place or agreed point.

Different levels of insurance for CIF and CIP

Under CIF and CIP, the risk passes to the buyer when the goods are handed to the carrier, yet many buyers assume the insurance covers them until arrival. Historically, the minimum cover was Clause C, a very limited level that many parties did not realise they had. Incoterms 2020 introduced Clause A, often described as all risks with exceptions, as the default for CIP.

Type of riskClause AClause BClause C
Fire or explosionYesYesYes
Vessel stranded or sunkYesYesYes
Barratry or jettisonYesYesYes
CollisionYesYesYes
General average sacrificeYesYesYes
EarthquakeYesYesNo
Washing overboard or water entryYesYesNo
Theft, pilferage or non-deliveryYesNoNo
Malicious damageYesNoNo
ShortageYesNoNo
Contamination or heavy weatherYesNoNo
DelayNoNoNo
Spontaneous combustionNoNoNo
War, strikes or civil unrestNoNoNo
Terrorism or piracyNoNoNo

The minimum cover now differs per rule:

  • CIF (sea transport) keeps the default Clause C cover.
  • CIP (any mode of transport) uses the default Clause A cover.

The parties can agree a higher level for CIF or a lower level for CIP in the sales contract, so it is still worth negotiating. In both cases the insurance must cover at least 110% of the contract price, in the currency of the contract.

An on-board bill of lading under FCA

For sea transport, the seller, the buyer or their banks may require a bill of lading with an on-board notation. Under FCA, delivery takes place before the goods are loaded on the vessel, so under Incoterms 2010 the seller could not always get such a bill of lading from the carrier.

The on-board bill of lading is often the evidence that a condition of a letter of credit has been met. A letter of credit may, for example, require a full set of original bills of lading for a shipment from Ho Chi Minh City to Manila. The bill of lading then has to show the name of the vessel, the port of loading and the date the goods were loaded on board.

For containerised cargo, FCA is recommended over FOB. Incoterms 2020 lets buyer and seller agree that the buyer instructs its carrier to issue an on-board bill of lading to the seller once the goods are loaded.

Why separate maritime rules still exist

Maritime law is long established and covers shipping, insurance and related disputes. The International Maritime Organization (IMO) keeps the conventions up to date. The first edition of Incoterms, in 1936, was entirely maritime: FAS, FOB, C&F, CIF, Ex Ship and Ex Quay.

In the 1980s, containerisation led to the Free Carrier rule, which covered handover at onshore points such as container yards. That started the separation between maritime rules and rules for other modes of transport, which was formalised in 1990.

Maritime rules have their own traditions. CIF insurance is based on maritime cargo clauses, and loading a ship is costly enough to need its own rules (FAS and FOB). The difference between CPT and CFR shows why this matters: under CPT the goods are handed to the carrier, under CFR they are delivered on board the ship. That changes where the risk passes.

How to cite Incoterms correctly

Incoterms® is a trademark of the ICC, not a generic term. In the United States, domestic freight terms under the Uniform Commercial Code (UCC) are also in use, such as FOB place of shipment, FOB place of destination, FOB vessel, car or other vehicle, and FAS vessel. UCC terms focus on the transfer of ownership and favour the seller when terms are unspecified. Incoterms focus on delivery, costs and the transfer of risk, not on ownership.

A correct reference always contains four elements: the rule, the named port, place or point, the word Incoterms, and the year. For example:

  • FCA Paris, France, Incoterms® 2020
  • DAP Portland, Incoterms® 2020
  • FOB Rotterdam, Incoterms® 2020
  • CIF Shanghai, Incoterms® 2020

The year matters because earlier versions can still be used. That is allowed, but stating the year removes any doubt about which version applies.

Using Incoterms in contracts: practical tips

Discuss the terms of sale early, and at every stage of drawing up the contract, whatever the type of sourcing. Everyone involved should understand the advantages and disadvantages of each rule.

  1. Name the place of delivery or port as precisely as possible, for example the full address of an industrial site rather than just a city.
  2. Include the Incoterm in the contract: the rule, the place or port, and the version, such as Incoterms® 2020.
  3. Choose a rule that suits the goods (type, weight and dimensions) and the mode of transport (road, rail, air or sea). Local port customs can affect how a rule is interpreted.
  4. Train everyone who concludes contracts. The wrong Incoterm can be very costly.
  5. Remember that Incoterms are not a complete contract. Agree payment terms, transfer of ownership and the consequences of a breach separately, for example in an SLA.
  6. Choose DAP if the seller cannot obtain import clearance.
  7. For containerised goods, consider FCA, CPT or CIP rather than FOB, CFR or CIF.
  8. Review the Incoterm when the mode of transport changes, for example when break-bulk cargo moves to containers.

Common mistakes in using Incoterms

  1. Using sea transport rules such as FOB or CIF for air or road shipments.
  2. Not stating an Incoterm at all, which makes it hard to allocate and monitor responsibilities.
  3. Doing more than the rule requires, such as the seller loading the goods under EXW.
  4. Using outdated rules such as DDU, DES, DAF or DEQ, or citing an old edition or no year at all.
  5. Abbreviating incorrectly, such as Ex-works instead of EXW. The correct form always has three letters.
  6. Using terms that are not recognised, such as DCI or DCE. Legal authorities do not recognise them, which may leave you without recourse in a dispute.
  7. Choosing the wrong rule, such as DDP when the seller cannot meet the customs registration requirements in the country of import.
  8. Being imprecise, such as FOB South African port, which makes cost estimates unreliable.
  9. Ignoring the mode of transport and not reviewing the rule when cargo moves to containers.
  10. Sticking to familiar terms after they no longer fit the situation, until a loss occurs.

For the exact obligations under each rule, consult the official ICC publication. Incoterms® and the Incoterms® 2020 logo are trademarks of the ICC; more information is available at iccwbo.org. Parts of this article are based on SCM Dojo.

Want clear agreements on delivery dates and terms with every supplier? Book a demo.